Use portable bedside monitors and anesthesia monitors

Use portable bedside monitors and anesthesia monitors

Portable bedside monitors to avoid frequent switching equipment, because the moment in the switch machine will have a great current, will impact the machine, affecting the life of the machine; it should be with a separate ground wire in order to ensure the safety of electrical appliances ; To ensure that the use of the ventilation ventilation, can not be too close to the wall, it can not be placed on the monitor affect the heat of the items; the same time to reduce the noise caused by the instrument alarm, try to reduce the alarm volume, to create safe and comfortable for patients Of the environment, in order to reduce unnecessary panic psychology of patients; when the sensor is mounted to the monitor, to carefully align the positioning groove, can not be inserted strong, to avoid the pin deformation within the plug; SpO2 probe to avoid strong Light use, so as to avoid the light on the measurement of blood oxygen interference lead to inaccurate measurements; at the same time if you can see the LED light, but can not measure blood oxygen value, to use alcohol cotton ball to wipe the LED and receiver tube, so Can solve the problem.

Anesthesia monitor to prevent radio interference, to stay away from interfering with radio waves at the same time to pay attention to the sensor is good performance, the connection is normal; to check the valve movement, loop leakage distort or not, and the working state of the ventilator; in use Before doing safety checks, mainly in the following aspects: emergency ventilation is intact, check the high pressure and low pressure systems, check the breathing circuit, check the manual and automatic mechanical ventilation and check valve, check all the monitors set Standard and its upper and lower alarm limits, and check the final state of the machine. Only done